Fit Bike Co. Shiv V3 Forks

Please check with your local bike shop before making an online purchase from our website. If we have it in stock, they will have access to it. Do your best to support local shops, we need them in the scene!

Fit's goal was to design and produce an extremely strong fork with plenty of tire clearance. After 2 years of R&D and a lot of investment in tooling, the Shiv V3 is available with a quick 25mm offset. Here are a few features that make these forks so strong.

• Using left and right specific investment cast drop-outs instead of traditional Cr-Mo plate, they’ve eliminated the weld gap on the inside of the drops, and were able to thicken up the drops toward the top making a much stronger drop-out/leg connection.
• Seamless, swaged legs provide more strength than welded or fused caps-especially if pegs are installed. The ends of these legs are formed, not capped and welded so there is nothing to fracture.
• A longer 166mm CNC’d steerer tube with increased wall thicknesses wherever possible and a 24mm x 1.5 compression cap with integrated race.
• Tapered and butted legs provide tons of strength, crown weld surface, and peg clearance.
• Post weld 4Q Baked heat-treatment

SPECS >

• Legs - Seamless Swaged (No Welded Cap)
• Dropouts - Investment Cast
• Steerer Tube - 1 Piece CNC-Machined 4130 CrMo
• Steerer Tube Length - 166mm
• Compression - M24 X 1.5 Thread – 6mm Allen Slot
• Axle to Crown - 320mm
• Offset - 25mm
• Weight - 2.25 lb
• Heat Treat - 4Q Baked Post-Weld